Description
1000 Gallon Above-Ground ASME Propane Tank – 250 PSIG – 15′ 10 13/16″ Length
Product Overview
The 1000 Gallon Above-Ground ASME Propane Tank is a propane storage vessel with a stated 1,000-gallon capacity. At an 80% filling level, the provided specifications indicate approximately 800 gallons of propane capacity. The tank is configured for above-ground installation and is designed in accordance with ASME Section VIII, Division 1.
The supplied specifications identify a 250 psig maximum rated pressure and an operating temperature range of -20°F to 125°F.
Key Features
- Tank Capacity: 1,000 gallons
- Propane Capacity at 80% Fill: Approximately 800 gallons
- Tank Type: Above-ground ASME propane tank
- Design Standard: ASME Section VIII, Division 1
- Maximum Rated Pressure: 250 psig
- Temperature Range: -20°F to 125°F
- Dimensions (L × W × H): 15′ 10 13/16″ × 40.96″ × 4′ 1 3/8″
- Vessel Finish: TGIC powder-coated finish
- Vacuum Specification: Vessel may be evacuated to approximately 14.7 psi full vacuum where permitted by the applicable design specifications
Product Details
The tank is designed and manufactured in accordance with the applicable requirements of the latest edition of the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1.
The supplied specifications also reference applicable propane storage and installation requirements, including NFPA 58, where applicable. The vessel is rated at 250 psig for temperatures ranging from -20°F to 125°F.
A liquid withdrawal opening located under the dome is specified only for applicable 120-gallon-water-capacity (120 WG) vessels and therefore is not presented as a feature of this 1,000-gallon tank.
Applications
The provided information identifies potential applications including:
- Large residential properties
- Commercial propane storage
- Pool heating systems
- Backup generators
Actual suitability depends on the tank configuration, installation requirements, applicable regulations, and the specifications of the connected propane system.
Important Information
Installation requirements, required clearances, permits, and applicable codes vary by location. The tank should be installed by appropriately qualified professionals in accordance with applicable local, state, and federal requirements.
Customers should verify the manufacturer’s documentation for the exact vessel specifications, pressure rating, dimensions, installation requirements, and applicable code requirements before purchase or installation.
How are propane products shipped?
